This HTML tutorial shows how to flow text around a normally inline image element using the CSS float property. Watch more at http://www.lynda.com/HTML-tutorials/HTML-Essential-Training-2012/99326-2.html?utm_medium=viral&utm_source=youtube&utm_campaign=videoupload-web-dev-mEMrFbX4Agg.
This tutorial is a single movie from the first chapter of the HTML Essential Training course presented by lynda.com author Bill Weinman. The complete course is 5.5 hours long and introduces new web designers to the nuts and bolts of HTML (HyperText Markup Language), the programming language behind most web pages
HTML Essential Training table of contents:
2. Fundamentals of HTML
3. Meta data and the document head
5. A CSS Primer
9. Structural, contextual, and semantic elements
10. Audio, video and other objects
11. HTML5 Data Elements
12. HTML5 Microdata
13. Document Outlines
17. A case study
Download the appropriate system image for your device below, then unzip it to a safe directory.
Connect your device to your computer over USB.
Start the device in fastboot mode with one of the following methods:
Using the adb tool: With the device powered on, execute:
Using a key combo: Turn the device off, then turn it on and immediately hold down the relevant key combination for your device.
If necessary, unlock the devices bootloader using one of the following methods:
If you are updating a Nexus or Pixel device that is manufactured in 2015 or later (for example, a Nexus 5X, Nexus 6P, Pixel, Pixel XL, Pixel 2 or Pixel 2 XL device), run this command:
For Pixel 2: To flash the bootloader, Pixel 2s boot loader must be updated to at least Oreo MR1s version first. This may be done by applying an over-the-air (OTA) update, or sideloading a full OTA with the instructions on that page.
For Pixel 2 XL only with loader version prior to TMZ20a: the critical partitions may also need to be unlocked before flashing. The unlock can be performed with this command, and should NOT be done on other devices:
If you are updating an older device, run this command:
The target device will show you a confirmation screen. (This erases all data on the target device.)
See Unlocking the bootloader for more detailed instructions.
Open a terminal and navigate to the unzipped system image directory.