It's better to use adhesive tape to prevent to prevent dust from coming inside.
In most cases there is an adhesive sticker on the back side of the LCD, but my advice is to use also adhesive tape for the touch screen glass, like in the video.
thank you for the useful videos.
I have a Samsung galaxy s3 GT-I9300 that has a broken lcd screen.
I want to fix it with the lowest cost so I thought of buying a used s3 that is for parts, ex " not charging - no signal...etc"
but I want your help on which models has compatible LCD with I9300 ?
If you want to use display assembly from another phone, you have to use it together with the display frame. You can't remove the screen from the frame without breaking. In this situation you can use only i9300 because the difference is in the frames.
If you mean 6:40, this is from the spare part - a protective foil, underneath is the adhesive tape. You spare part must have it. I will post link only for an example.
and this is adhesive sticker for the touch screen (only an example):
- awesome video but this shows me that i cant change it on my own without heat gun
- You can use a hairdryer, but if you have no experience, I recommend you to use full display assembly - touch screen + display + frame. It's easier, and the price is almost the same.
Download the appropriate system image for your device below, then unzip it to a safe directory.
Connect your device to your computer over USB.
Start the device in fastboot mode with one of the following methods:
Using the adb tool: With the device powered on, execute:
Using a key combo: Turn the device off, then turn it on and immediately hold down the relevant key combination for your device.
If necessary, unlock the devices bootloader using one of the following methods:
If you are updating a Nexus or Pixel device that is manufactured in 2015 or later (for example, a Nexus 5X, Nexus 6P, Pixel, Pixel XL, Pixel 2 or Pixel 2 XL device), run this command:
For Pixel 2: To flash the bootloader, Pixel 2s boot loader must be updated to at least Oreo MR1s version first. This may be done by applying an over-the-air (OTA) update, or sideloading a full OTA with the instructions on that page.
For Pixel 2 XL only with loader version prior to TMZ20a: the critical partitions may also need to be unlocked before flashing. The unlock can be performed with this command, and should NOT be done on other devices:
If you are updating an older device, run this command:
The target device will show you a confirmation screen. (This erases all data on the target device.)
See Unlocking the bootloader for more detailed instructions.
Open a terminal and navigate to the unzipped system image directory.